1.ΧScope
Ʒ涨ػʵо۹Ƽ˾¼о۹磩ӵļҪԷעThis product specification provides the core of Qinhuangdao Xinchi Ptoelectricity Technology Co., Ltd. (hereinafter referred to as the Xinchi) production of cylindrical Li-ion battery technology requirements, test methods and precautions.
2.ƷͺProduction Type
2.1Ʒӵ li ion battery pack
2.2ͺ(Type)2S1P-12.8V3000mAh
3.ۡγߴ缰ãͼPhysical Dimensions and parts specification
3.1ۣκӰܵȱݣơѷ졢й©ȡAppearance: not allowed to have any impact on battery performance of visual defects such as cracks, leaks and so on.
3.2γߴ缰ãͼPhysical Size and parts specification
4.漼ָGeneral Specifications
|
ĿItem |
Standard |
עRemarks |
|
4.1Nominal capacity |
3100mAh |
0.2C-2.0V |
|
4.2ƵѹNominal Voltage |
12.8V |
|
|
4.3Inter impendence |
200m |
AC 1KHZ |
|
4.4ֹѹCharging cut-off V |
14.60V0.05V |
ն豸 |
|
4.5ֹCharging cut-off Current |
0.02C |
ն豸 |
|
4.6磨CC/CVNominal Charging |
0.5C-14.60V |
|
|
4.7Max charging Rate |
1.5C |
|
|
4.8ŵֹѹDischarging cut-off Voltage |
8.00V |
ն豸 |
|
4.9ŵMax Max consistance discharge Rate |
3C |
|
|
4.10¶ȣWorking Temp. |
Charging0C 55C |
|
|
ŵDischarging-30C 75C |
| |
|
4.11¶Storage Temp. |
-30C 45C |
|
|
4.12Weight |
360g approx. |
|
For each single cell, if discharge at 0.5Cwhen the cut-off voltage is 2.4V, the bench mark capacity under this condition is 96% of the initial capacity; if discharge at 0.2C, when the cut-off voltage is 2.4V, the bench mark capacity under this codition is 98% of the initial capacity.
5.Testing Conditions
5.1ر˵вԾ¶ȣ252 ʪȣ6520?RHUnless otherwise specified, all tests in this book are in standard temperature: 25 2 , Humidity: (65 20)% RH.
5.2磺ڻ¶252£0.5C14.60VתΪ14.60ѹ磬ֱСڻ0.02Cֹͣ硣Standard charge: the ambient temperature of 25 2 under the conditions of 1C constant current tocharge to 14.60V, 14.60V constant voltage conversion until the charge current is less than or equal to 0.02C stops charging.
6.Electrical properties
|
ĿTest Item |
ԷTest method |
test standard |
|
6.1 0.2Cŵ0.2Cdischarge rate |
ذ5.20.51h0.2CŵֹѹCharged the battery according to the method on 5.2,after 0.5-1Hour later,Discharge the cell based on 0.2C current rate until cut-off voltage, |
ŵݱ100% Discharge capacitynominal capacity 100% |
|
6.2 1.5Cŵ1.5C discharge rate |
ذ5.20.51h1.5CŵֹѹCharged the battery according to the method on 5.2,after 0.5-1Hour later,Discharge the cell based on 1.5C current rate until cut-off voltage, |
ŵݱ80% Discharge capacitynominal capacity 80% |
|
6.3 High temp.feature |
ذ5.255C2C¸5h0.2CŵֹѹCharged the battery according to the method on 5.2,after 5 Hours under 55C2C, Discharge the cell based on 0.2C current rate until cut-off voltage, |
ŵݱ95% Discharge capacitynominal capacity 95% |
|
6.4Low temp.feature |
ذ5.2-20C2C¸20h0.2CŵֹѹCharged the battery according to the method on 5.2,after 5 Hours under -20C2C, Discharge the cell based on 0.2C current rate until cut-off voltage, |
ŵݱ40% Discharge capacitynominal capacity 40% |
|
6.5ɵ籣Charge retention capability. |
ذ5.225C2C¸28죬0.2Cŵֹѹٰ5.20.51h0.2CŵֹѹCharged the battery according to the method on 5.2,after 28 days,Discharge the cell based on 0.2C current rate until cut-off voltage; Charged the battery again according to the method on 5.2, Discharge the cell based on 0.2C current rate until cut-off voltage. |
ŵݱ85% Discharge capacitynominal capacity 85% ָݱ90% Recovery capacitynominal capacity 90% |
|
6.6ѭlifetime |
ذ5.20.51h0.2Cŵֹѹ0.51hٽһγŵѭѭ2000ΡCharged the battery according to the method on 5.2,after 0.5-1Hour later,Discharge the cell based on 0.2C current rate until cut-off voltage, after 0.5-1Hour later,Charge and discharge 2000 cycle times according to the method of 5.2. |
ŵݱ70% Discharge capacitynominal capacity 70% |
|
6.7storage feature |
ذ5.20.51h0.2Cŵ2h25C2C´90죻ٰ5.20.51h0.2CŵֹѹCharged the battery according to the method on 5.2,after 0.5-1Hour later, Continuous discharge cell one hour,then storage based on 0.2C current rate until cut-off voltage, Battery in the 25 C 2 C stored 90 days; then charged according to the 5.2, hold 0.5 ~ 1h, to 0.2C discharge rate to cut-off voltage. |
ָݱ95% Recovery capacitynominal capacity 95% |
7.ȫSecurity Features
|
ĿItem |
ԷTest method |
test standard |
|
7.1ŵOver-discharge feature |
ذ5.21CзŵֹѹȻС10ĵ轫14졣۲۱仯After charging the battery according to 5.2 based on 1C dischrage current rate,until the cut-off voltage, and then connect the battery positive and negative via a resistor less than 10, on hold for 14 days. Observed changes in cell appearance. |
𡢲ը©Һ No fire, no explosion, no leakage |
|
7.2.Over-charged feature |
Ƚ0.2Cŵֹѹ,ȻںѹԴ,ڵ3C,ѹΪ10V,ȻԵ3C,ֱѹ10V,7hѹ. 0.2C discharge the battery to the first cut-off voltage, and then connected to the battery positive and negative constant voltage power supply, adjust the current to 3C rate, voltage is 10V, then charging the battery based on 3C, until the output voltage not less than 10V, or continuous charging 7h or Voltage no longer increases. |
𡢲ը No fire, no explosion |
|
7.3· Short circuit. |
ȵżĵͨ,ͭ߶·(·ܵ費50ŷ),ʵмӵ¶ȱ仯,о¶½ȷֵԼ10ʱ,ʵ. The battery, thermocouple connected ,is put in a fume hood, short-circuit the positive and negative with the copper wire (total resistance is not more than 50 milliohms), record the battery temperature during the period of testing, the temperature of the cell drop to lower than the peak About 10 , then cut off the experiment. |
𡢲ը¶ȡ150 No fire, no explosion Max temp150 |
|
7.4 heating cell |
طڵȹķ,¶52/min1502沢120min.Put the battery in the electric blast oven, the temperature is raised from 5 2 / min to 150 2 and keep 120min. |
𡢲ըNo fire, no explosion |
|
7.5ѹ crash battery |
طڼѹ豸ѹ֮䣬ƽڼѹƽ棬ѹ13 kNѹ1min. put Battery between the surface of two surface of extrusion equipments,and gradually increase the pressure to 13 kN, keep up the pressure 1min.
|
𡢲ըNo fire, no explosion |
|
7.6Heavy impact battery |
طڳ̨,һ15.8mmĸ÷ŵ,ƽƽ,9.1kgش610mm߶,,. Put the battery on the impact equipment, the steel columns will be placed a 15.8mm battery center, steel columns parallel to the longitudinal axis plane, so that the weight of 9.1kg hammer free fall since the height of 610mm, the impact of the battery, the battery allows deformation |
𡢲ըNo fire, no explosion |
|
7.7Acupuncture battery |
ͨ, 3.0mmIJ 20-40mm/sٶȴλ. Acupuncture the battery with a 3.0mm stainless steel needle under the speed of 20-40mm / s through maximum surface center of the battery. |
𡢲ըNo fire, no explosion |
8.֤
Գ֮ҹ˾ṩ6µIJƷκΥҹ˾Ʒ˵鼰ֲIJΪǷɴ˵µIJƷ˻ʧҹ˾еΣ·顢ʹò⣬˾ΡWe offer 6-months warranty to the cell made by Xinchi;Any violation of the Operating Manual for our products and brochures, are illegal operation, which lead to any cell damage, loss, and We will not assume warranty responsibility; If any problem comes from the circuit, battery packed by user, charger connection with the use of the problem, the company is not liable.
9.Storage and transportation
9.1ѹΪ3.20-3.40Vÿ3³ŵһΡStored based on voltage 3.20-3.40V, we recommend every 3 months charge and discharge one time.
9.2ԼΪ50%״̬ӦѹɹʪBattery 50% state of charge during transportation, should avoid strenuous vibration, compression, sun and wet.
10.ʹʱעBattery handling precautions
Ϊֹؿܷй©ȡըעԤʩTo prevent battery from leakage, heat, explode; please take the precautionary steps carefully.
Warning:
l Ͻؽ뺣ˮˮУ治ʱӦĻСNever directly connect batteries to a direct power source.
l ֹȸԴԣ𡢼ʹúáNever short circuit batteries
l ʱѡӵרóDo not strike or drop batteries.
l Ͻߵʹõ. Do not charge or use batteries with the positive and negative terminals reversed
l ϽֱӲԴ. Do not apply water, sea water or other oxidizing agents to batteries.
l ֹضڻ. Never solder lead wires directly on to batteries.
l ֹýֱӵ·. Never dispose of batteries in fire or heat them.
l ֹ,緢Сһ. Never solder lead wires directly on to batteries, nail through the battery with any sharp objects.
l ֹṳ̂ص. Store batteries in a dry place and within the recommended storage temperature range.
l ֱֹӺӵغöӻ̴. When charging the battery, use amblygonite battery charger only.
С ! Caution
l ֹڸ£ȵ»ȵУʹûõأܻعȡʧЧ̡Prohibited at high temperatures (very hot sun or in a hot car) to use or storage the battery, or the battery may cause overheating or fire or function failure, shortened lifetime.
l ֹǿǿųĵطʹ,ƻذȫװ,ȫ. Avoid to use the battery in electrostatic and magnetic place, or safety devices easy to destroy,to rise unsafe risks.
l طй¶,Һ۾,벻Ҫ,Ӧˮϴ۾,ҽ,˺۾. If the battery leaks and the electrolyte in your eyes, do not rub first, apply clean water wash the eye first, and immediately contact the local medical facility.
l طζ,ȡɫλʹá桢гκ쳣,شװû벢ͣ. If the battery gives off an odor, fever, discoloration, deformation in the usage, storage, charging, immediately cut off the battery from the device or charger.
l 缫Ū,ʹǰӦøɲĨ,ܻᵼ½ӴʧЧ. If the electrode dirty, wipe with a dry cloth before use, or it may cause functional failure of poor contact.
l ֮ӦþԵֽס缫,Է𡢱ըFor the waste battery applications ,use electrode insulation wrap pack it to prevent fire, explosion.
ͼDrawing
Cycle life curve
|
Cycle times |
